Search for: All records

A femtosecond chirped pulse amplifier based on cryogenically cooled Fe:ZnSe was demonstrated at 333 Hz—33 times higher than previous results achieved at near-room-temperature. The long upper-state lifetime allows free-running, diode-pumped Er:YAG lasers to be used as pump lasers. 250-fs, 4.59-mJ pulses are produced with a center wavelength of 4.07 µm, which avoids strong atmospheric CO₂absorption that cuts on around 4.2 µm. It is therefore possible to operate the laser in ambient air with good beam quality. By focusing the 18-GW beam in air, harmonics up to the ninth order were observed indicating its potential for use in strong-field experimentation. 

3.2-mJ, 92-fs pulses centered at 3.1 µm are generated at a 1-kHz repetition rate through a tabletop optical parametric chirped pulse amplification (OPCPA) system based on ZnGeP₂crystals. Pumped by a 2-µm chirped pulse amplifier with a flat-top beam profile, the amplifier achieves a 16.5% overall efficiency, which, to the best of our knowledge, is the highest efficiency achieved by OPCPA at this wavelength. Harmonics up to the seventh order are observed after focusing the output in the air. 

It is well known that the gain and efficiency of an amplifier with a quasi-three level medium such as Ho:YLF is strongly affected by the coolant temperature. By cooling the Ho:YLF crystals of a two-stage energy booster in a Ho:YLF Chirped Pulse Amplification laser with -20°C thermoelectric cooling rather than room temperature water, a 60 mJ pulse energy at 1 kHz repetition rate was achieved with 8.5 mJ input. 

The advent of chirped-pulse amplification in the 1980s and femtosecond Ti:sapphire lasers in the 1990s enabled transformative advances in intense laser–matter interaction physics. Whereas most of experiments have been conducted in the limited near-infrared range of 0.8–1 μm, theories predict that many physical phenomena such as high harmonic generation in gases favor long laser wavelengths in terms of extending the high-energy cutoff. Significant progress has been made in developing few-cycle, carrier-envelope phase-stabilized, high-peak-power lasers in the 1.6–2 μm range that has laid the foundation for attosecond X ray sources in the water window. Even longer wavelength lasers are becoming available that are suitable to study light filamentation, high harmonic generation, and laser–plasma interaction in the relativistic regime. Long-wavelength lasers are suitable for sub-bandgap strong-field excitation of a wide range of solid materials, including semiconductors. In the strong-field limit, bulk crystals also produce high-order harmonics. In this review, we first introduce several important wavelength scaling laws in strong-field physics, then describe recent breakthroughs in short- (1.4–3 μm), mid- (3–8 μm), and long-wave (8–15 μm) infrared laser technology, and finally provide examples of strong-field applications of these novel lasers. Some of the broadband ultrafast infrared lasers will have profound effects on medicine, environmental protection, and national defense, because their wavelengths cover the water absorption band, the molecular fingerprint region, as well as the atmospheric infrared transparent window.